FD1 Series FlexDraper®
FD1 Series FlexDraper® Headers
Most combine headers perform well in perfect harvest conditions, but when was the last time you had perfect conditions? MacDon FlexDraper® and Draper Headers are designed to maximize productivity in the toughest harvesting situations.
*Some products and/or options may not be available in all markets. See your MacDon Dealer for availability.
Features
PERFORMANCE OPTIONS
Upper Cross Auger
WHAT IT IS/DOES
The upper cross auger attaches in front of the backtube and improves crop feeding into the center of the header in heavy crop conditions. It is ideal for high-volume harvesting of forages, peas, canola, mustard and other tall, bushy, hard to feed crops. It prevents crop from balling up on the drapers and flowing over the backtube.
FEATURES/BENEFITS
- Moves heavy, bushy, high-volume crops to the center of the header for smooth feeding
- Runs the full length of the header on sizes up to 40 feet*
- Twin pitch flighting at the center of the auger aggressively drives crop into the combine
- Features a shut-off valve to disengage the drive when the auger is not required
* On 45 foot model the Upper Cross Auger does not run the full length of the header.
Spare Knife
WHAT IT IS/DOES
This kit is used to replace a damaged knife while in the field with a full length factory replacement. The spare knife is installed at the factory into the backtube of the header before shipping. Never be without a spare knife in the field
FEATURES/BENEFITS
- The spare knife is stored out of the way inside the backtube of D1 & FD1 Series heade
WHAT IT IS/DOES
The Auto Lateral Tilt Kit consists of two sensors added to the header height sensing circuit. These sensors provide inputs to enable automatic function of the combines feeder house lateral tilt function, in addition to the standard automatic height control. This provides an increased range of automatic terrain following over rolling or uneven terrain.
FEATURES/BENEFITS
- Faster feeder house lateral tilt response in rolling and uneven terrain.
Notes: Not recommended for use on steep hills. Not compatible with New Holland combine 10 volt AHHC system.
Specs
Size | 7.6 M (25') | 9.1 M (30') | 10.6 M (35') | 12.2 M (40') | 13.7 M (45') |
---|---|---|---|---|---|
Weight* Single Knife Drive With FM100 | 3067 kg (6760 lb) | 3384 kg (7460 lb) | 3520 kg (7760 lb) | 3733 kg (8230 lb) | - |
Weight* Double Knife Drive With FM100 | - | - | - | 3797 kg (8370 lb) | 3992 kg (8800 lb) |
Knife: Type / Drive / Speed / Guards | Single or double knife / Hydraulic, MacDon design enclosed oil bath wobble box(es) / 1050 to 1400 spm, varies depending on header size / Pointed DHT (double heat-treated), strong, mud resistant profile | ||||
Reel: Type / Drive / Speed / Fingers | Pick-up reel, 2-piece (double) (FD125 1-piece), flip-over design, cam-leading finger control / Hydraulic / 0 to 67 rpm, varies depending on combine model / 279 mm (11") length, wear-resistant HD plastic, 102 mm (4") spacing (FD125, 152 mm (6") spacing) | ||||
Conveyor: Type / Drive / Speed | 1057 mm (41.6") width, reversible 680.4 g (24 oz) rubber skim-coated drapers, double V-guide with tracking, integral seal on leading edge / Hydraulic / 0 to 194 m/min (0 to 636 ft/min) (Depending on combine model) | ||||
Standard Features | Adapters for most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators | ||||
Field-Installed Options | Upper cross auger, stabilizer wheels, in-cab side draper speed control, slow speed transport, lateral tilt automatic header height control | ||||
*All Listed Weights Are Approximations And Will Vary Depending On Header Configuration. Check With Your Dealer For Combine Ratings. Weight Includes FM100 Combine Adapter. The FM100 Combine Adapter Weighs Approximately 2400 Lb (1089 Kg); This Number Varies By Combine Model. |
Center Draper | Feed Auger | |
---|---|---|
Size | 2000mm (78.7") width | 1660mm (65.3") width |
Weight | Approximately 1089 kg (2400 lb), varies by combine model | |
Type | Self-tracking, rubber-coated polyester fabric feed draper with rubber slats, hydraulic drive (reversible) | Floating auger, mechanical drive (reversible), removable retracting fingers with full-retraction when reversing |
Speed | 107-122 m/min (350 to 400 ft/min) | 185-206 rpm, varies with combine model |
Header Flotation: Type / Vertical Range / Lateral Range (Tilt) | Two pairs of coil springs, independent adjustment, transport lock-out / 178 mm (7") / 4.8 degrees | |
Fits Most Current Model Combines. |